EICR Renewal Kent
EICR compliance support across Kent. Unsatisfactory certificates, expired EICRs, C1/C2 remedial works, and regulatory compliance for landlords.
EICR Renewal Kent
SEG Ltd helps landlords and property managers across Kent understand and meet their EICR compliance obligations under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020. These regulations require a valid EICR every five years, with remedial works for any C1 or C2 defects completed within 28 days.
If your EICR has come back unsatisfactory, your certificate has expired, or you've been contacted by the local authority about non-compliance, we can help. Our qualified engineers carry out inspections, complete remedial works for C1 and C2 coded defects, and issue updated satisfactory certificates, getting you back into compliance as quickly as possible.
We also help landlords across Kent who have received penalties or improvement notices by completing outstanding inspections and remedial works promptly. All our engineers are qualified, DBS checked, and fully insured. Contact us for urgent compliance support.
What an EICR Covers
A thorough inspection and test of all fixed electrical wiring and installations in the property.
Visual Inspection
Every accessible part of the fixed wiring is visually inspected for damage, deterioration, defects, and non-compliance with current regulations.
Circuit Testing
Every circuit is tested for earth fault loop impedance, insulation resistance, RCD operation, and correct polarity, verifying safe and compliant performance.
Consumer Unit Check
The consumer unit (fuse board) is inspected for correct protection devices, labelling, condition, and compliance with BS7671 18th Edition requirements.
Coded Observations
Any defects are recorded with observation codes, C1 (danger present), C2 (potentially dangerous), C3 (improvement recommended), or FI (further investigation required).
Detailed Report
You receive a comprehensive EICR document showing every circuit tested, results achieved, and any observations with coded recommendations for remedial work.
Remedial Works
If C1 or C2 defects are found, we can carry out the remedial works in-house, fixing the faults, retesting, and issuing an updated satisfactory certificate.
Why Choose Security & Electrical Group
Trusted by landlords, letting agents, and commercial clients across Kent and Medway.
Fully Insured
Full public liability and professional indemnity insurance on every project.
Qualified Engineers
All electrical work carried out by qualified, experienced engineers to BS7671 18th Edition.
DBS Checked
All engineers are DBS checked, essential for access to tenanted and occupied properties.
Remedial Works
If faults are found, we carry out all remedial works in-house, no need for a separate contractor.
Fast Turnaround
Reports and certificates issued promptly, keeping you compliant without unnecessary delays.
How It Works
A straightforward process from booking to certificate.
Book Your EICR
Call us or fill in the form below. We'll arrange a convenient date for the inspection, coordinating with tenants or site contacts as needed.
Inspection & Testing
Our qualified engineer inspects and tests all fixed wiring, circuits, and protection devices. Most residential EICRs take 2-4 hours depending on property size.
Report & Certificate
You receive your EICR report with a satisfactory or unsatisfactory outcome. If remedial works are needed, we quote and complete them promptly, then issue an updated certificate.
Frequently Asked Questions
C1 means 'danger present', an immediate risk that requires urgent attention. C2 means 'potentially dangerous', a defect that could become dangerous and needs remedial action within 28 days or the timescale stated in the report. C3 means 'improvement recommended', not a compliance failure but an advisory upgrade. FI means 'further investigation required'.
Landlords who fail to comply with the Electrical Safety Standards Regulations face fines of up to £30,000 per offence. Local authorities can also arrange for the inspection and remedial works to be carried out and recover the costs from the landlord. Non-compliance can also affect your ability to evict tenants under Section 21.
We prioritise remedial works for unsatisfactory EICRs. Our engineers across Kent can typically schedule remedial works within a few working days of the inspection. After repairs are completed, we retest the affected circuits and issue an updated satisfactory certificate, usually on the same visit as the remedial work.
Related EICR Services
Get a Free Quote
Fill in the form below and we'll get back to you within one working day.
Contact Us Directly
EICR & Remedial
Inspection, testing, and remedial works
All carried out by the same qualified engineer.
Company
Security & Electrical Group Ltd
Company No. 16859897