EICR Kent
Professional EICR services across Kent. Electrical inspection, testing, certification, and remedial works for residential and commercial properties.
EICR Kent
SEG Ltd provides professional EICR services across Kent, carrying out Electrical Installation Condition Reports for residential and commercial properties. An EICR is a formal inspection and test of the fixed electrical wiring in a property, identifying any deterioration, defects, or non-compliance with current safety standards.
Our qualified engineers across Kent inspect and test every circuit, consumer unit, and protection device in your property, issuing a detailed report with coded observations. If the report is satisfactory, you receive your certificate immediately. If C1 or C2 defects are found, we carry out the remedial works in-house and issue an updated satisfactory certificate.
EICRs are a legal requirement for landlords (every 5 years), recommended for homeowners (every 10 years), and required for commercial premises (every 5 years or as specified by your insurer). All our engineers are qualified, DBS checked, and fully insured. Contact us to book your EICR.
What an EICR Covers
A thorough inspection and test of all fixed electrical wiring and installations in the property.
Visual Inspection
Every accessible part of the fixed wiring is visually inspected for damage, deterioration, defects, and non-compliance with current regulations.
Circuit Testing
Every circuit is tested for earth fault loop impedance, insulation resistance, RCD operation, and correct polarity, verifying safe and compliant performance.
Consumer Unit Check
The consumer unit (fuse board) is inspected for correct protection devices, labelling, condition, and compliance with BS7671 18th Edition requirements.
Coded Observations
Any defects are recorded with observation codes, C1 (danger present), C2 (potentially dangerous), C3 (improvement recommended), or FI (further investigation required).
Detailed Report
You receive a comprehensive EICR document showing every circuit tested, results achieved, and any observations with coded recommendations for remedial work.
Remedial Works
If C1 or C2 defects are found, we can carry out the remedial works in-house, fixing the faults, retesting, and issuing an updated satisfactory certificate.
Why Choose Security & Electrical Group
Trusted by landlords, letting agents, and commercial clients across Kent and Medway.
Fully Insured
Full public liability and professional indemnity insurance on every project.
Qualified Engineers
All electrical work carried out by qualified, experienced engineers to BS7671 18th Edition.
DBS Checked
All engineers are DBS checked, essential for access to tenanted and occupied properties.
Remedial Works
If faults are found, we carry out all remedial works in-house, no need for a separate contractor.
Fast Turnaround
Reports and certificates issued promptly, keeping you compliant without unnecessary delays.
How It Works
A straightforward process from booking to certificate.
Book Your EICR
Call us or fill in the form below. We'll arrange a convenient date for the inspection, coordinating with tenants or site contacts as needed.
Inspection & Testing
Our qualified engineer inspects and tests all fixed wiring, circuits, and protection devices. Most residential EICRs take 2-4 hours depending on property size.
Report & Certificate
You receive your EICR report with a satisfactory or unsatisfactory outcome. If remedial works are needed, we quote and complete them promptly, then issue an updated certificate.
Frequently Asked Questions
Landlords in Kent are legally required to have an EICR every 5 years for rental properties. Homeowners are recommended to have one every 10 years or at change of occupancy. Commercial premises typically need one every 5 years, though your insurer or local authority may specify more frequent inspection.
A typical residential EICR in Kent takes 2-4 hours depending on property size and number of circuits. Larger commercial properties may take a full day or more. We provide a time estimate when you book and keep disruption to a minimum.
Faults are recorded as coded observations, C1 (danger present), C2 (potentially dangerous), C3 (improvement recommended), or FI (further investigation). C1 and C2 defects must be remedied. We carry out all remedial works in-house, retest, and issue an updated satisfactory certificate.
Related EICR Services
Get a Free Quote
Fill in the form below and we'll get back to you within one working day.
Contact Us Directly
EICR & Remedial
Inspection, testing, and remedial works
All carried out by the same qualified engineer.
Company
Security & Electrical Group Ltd
Company No. 16859897